ANTAKIPRO 1200W FOG MACHINE RC 31W PUMP

Specification || * Voltage : AC110V/60Hz || * Power : 1200W || * Oil pump : 40DCB-31W || * Pre-heating time : 8mins || * Tank capacity : 2.5L || * Smoke output : 5000cu ft/min || * Non-stop smoke output : 30~40s || * Smoke distance : 6-8m || * Control : remote control || DIMENSION || * Net Weight : 4.85 KGS | 10.69 lbs. || * Gross Weight : 6.15 KGS | 13.56 || * Measurement : 52X31.5X23CM | 20.47 x 12.40 x 9.06 inches ||

Attention || Please follow the instructions on operation, safety and maintenance. To avoid the danger of electric shock and ensure the safe operation of the smoke machine surface. ? Keep it clean. ? Suitable for indoor use. ? Before using, please make sure that the power supply is the correct rated voltage. ? Please cut off the power supply before adding fog oil. ? The machine should be placed horizontally, not tilted or inverted. ||

After using, the power supply should be cut off or unplug. ? Fog machine is not waterproof, if moisture, water or fog oil into the machine, should immediately cut off the power and contact your agent. ? There are no parts inside the machine that can be repaired for the user. Please check with the dealer or qualified maintenance person. ||

Other points to note || 1. All fog machines are likely to be blocked due to fog filter, unclean or overheating, so regular maintenance will ensure long-term use. || 2. Please use dry cloth when cleaning and keep it clean when storing. ||

3. Pay attention to the operation || ? All fog machines will condense, condensing water or moisture around the nozzle; ? All fog machines will occasionally emit a small amount of fog during use or after disuse; ? All fog machines have a cycle, when the temperature drops to the low temperature point, the pump will automatically turn on, and start heating, until the heating is completed, the light is on again, and the fog can be restored.